Chrysler 2013 200 - Owner Manual - Manual (Page 473)

4. Twist and remove socket from lamp.
5. Remove bulb from socket and replace.
6. Reinstall the tail lamp, fasteners, and trunk liner.
License Plate Lamp
1. Using a small screwdriver, press inward the locking
tab on the side of the lamp assembly and pull down on
the lamp assembly for removal.
2. Pull bulb from socket, replace, and reinstall the lamp
assembly into place ensuring the locking tab is secure.
FLUID CAPACITIES
U.S. Metric
Fuel (Approximate)
All Engines — (Except 2.4L PZEV)
16.9 Gallons 64 Liters
2.4L PZEV (Partial Zero Emissions
Vehicle) 18.5 Gallons 70 Liters
7
MAINTAINING YOUR VEHICLE 471