Chassis – Chrysler 2013 200 - Owner Manual User Manual
Page 476
Advertising
![background image](/manuals/671759/476/background.png)
Component
Fluid, Lubricant, or Genuine Part
Spark Plugs – 3.6L Engine
We recommend you use MOPAR® Spark Plugs (Gap 0.043 in [1.1 mm]).
Fuel Selection
87 Octane
* PZEV = Partial Zero Emission Vehicle
Chassis
Component
Fluid, Lubricant, or Genuine Part
Automatic Transmission
We recommend you ONLY use MOPAR® ATF+4® Automatic Transmission
Fluid. Failure to use ATF+4® fluid may affect the function or performance
of your transmission.
Brake Master Cylinder
We recommend you use MOPAR® DOT 3 and SAE J1703. If DOT 3 brake
fluid is not available, then DOT 4 is acceptable.
Power Steering Reservoir
We recommend you use MOPAR® Power Steering Fluid +4, MOPAR®
ATF+4® Automatic Transmission Fluid.
474
MAINTAINING YOUR VEHICLE
Advertising