Chrysler 2013 200 Convertible - Owner Manual - Manual (Page 472)

BULB REPLACEMENT
Headlamp
1. Raise and prop open the hood. Locate the connector
behind the headlamp.
NOTE: It may be necessary to remove the air cleaner
filter housing and position the totally integrated power
module aside prior to replacing the low beam headlamp
on the driver’s side of the vehicle.
2. Reach into engine compartment and from behind the
lamp assembly and grasp the connector.
3. Rotate bulb and connector one-quarter turn and pull
outward from assembly.
470 MAINTAINING YOUR VEHICLE