Instrument cluster descriptions – Chrysler 2014 300 - Owner Manual User Manual

Page 306

Advertising
background image

INSTRUMENT CLUSTER DESCRIPTIONS

1. Tachometer

This gauge measures engine revolutions-per-minute
(RPM x 1000).

2. Park/Headlight ON Indicator — If Equipped

This indicator will illuminate when the park
lights or headlights are turned on.

3. Turn Signal Indicators

The arrow will flash with the exterior turn
signal when the turn signal lever is operated.

If the vehicle electronics sense that the vehicle
is driven more than 1 mile (1.6 km) with either

turn signal on, a continuous chime will sound to alert
you to turn the signals off. If either indicator flashes at a
rapid rate, check for a defective outside light bulb.

4. Front Fog Light Indicator — If Equipped

This indicator will illuminate when the front
fog lights are on.

5. High Beam Indicator

This indicator shows that the high beam head-
lights are on. Push the multifunction lever for-

ward to switch the headlights to high beam, and pull
toward yourself (normal position) to return to low beam.

6. Odometer Display/Electronic Vehicle Information
Center (EVIC) Display

Odometer Display

The odometer display shows the total distance the
vehicle has been driven.
U.S. Federal regulations require that upon transfer of
vehicle ownership, the seller certify to the purchaser
the correct mileage that the vehicle has been driven. If

304

UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising