Keyless enter-n-go, Normal starting, Using the engine start/stop button – Chrysler 2014 300 - Owner Manual User Manual

Page 369

Advertising
background image

CAUTION!

Damage to the transmission may occur if the follow-
ing precautions are not observed:
Do not shift from REVERSE, PARK, or NEUTRAL

into any forward gear when the engine is above
idle speed.

Shift into PARK only after the vehicle has come to

a complete stop.

Shift into or out of REVERSE only after the vehicle

has come to a complete stop and the engine is at
idle speed.

Before shifting into any gear, make sure your foot

is firmly on the brake pedal.

Keyless Enter-N-Go™

This feature allows the driver to oper-
ate the ignition switch with the push
of a button, as long as the Remote
Start/Keyless Enter-N-Go™ Key Fob
is in the passenger compartment.

Normal Starting

Using The ENGINE START/STOP Button

1. The transmission must be in PARK or NEUTRAL.

2. Press and hold the brake pedal while pressing the

ENGINE START/STOP button once.

3. The system takes over and attempts to start the

vehicle. If the vehicle fails to start, the starter will
disengage automatically after 10 seconds.

5

STARTING AND OPERATING

367

Advertising