Shift lever override — 5 speed transmission, Shift lever override — 5 speed, Transmission – Chrysler 2014 300 - Owner Manual User Manual

Page 501

Advertising
background image

NOTE:

Press the

ЉESC OffЉ switch, to place the Electronic

Stability Control (ESC) system in

ЉPartial OffЉ mode,

before rocking the vehicle. Refer to “Electronic Brake
Control” in “Starting And Operating” for further infor-
mation. Once the vehicle has been freed, press the

ЉESC

Off

Љ switch again to restore ЉESC OnЉ mode.

CAUTION!

When “rocking” a stuck vehicle by shifting be-

tween DRIVE and REVERSE, do not spin the
wheels faster than 15 mph (24 km/h), or drivetrain
damage may result.

Revving the engine or spinning the wheels too fast

may lead to transmission overheating and failure.
It can also damage the tires. Do not spin the wheels
above 30 mph (48 km/h) while in gear (no trans-
mission shifting occurring).

WARNING!

Fast spinning tires can be dangerous. Forces gener-
ated by excessive wheel speeds may cause damage, or
even failure, of the axle and tires. A tire could
explode and injure someone. Do not spin your vehi-
cle’s wheels faster than 30 mph (48 km/h) or for
longer than 30 seconds continuously without stop-
ping when you are stuck and do not let anyone near
a spinning wheel, no matter what the speed.

SHIFT LEVER OVERRIDE — 5 SPEED
TRANSMISSION

If a malfunction occurs and the shift lever cannot be
moved out of the PARK position, you can use the
following procedure to temporarily move the shift lever:

1. Turn the engine OFF.

2. Firmly apply the parking brake.

6

WHAT TO DO IN EMERGENCIES

499

Advertising