Front heated seats – Chrysler 2014 300 SRT - Owner Manual User Manual

Page 185

Advertising
background image

WARNING! (Continued)

Do not place anything on the seat or seatback that

insulates against heat, such as a blanket or cushion.
This may cause the seat heater to overheat. Sitting
in a seat that has been overheated could cause
serious burns due to the increased surface tempera-
ture of the seat.

Front Heated Seats

The front heated seats control buttons are located within
the climate or controls screen of the touchscreen.

• Press the heated seat button

once to turn the High

setting On.

• Press the heated seat button

a second time to turn

the Low setting On.

• Press the heated seat button

a third time to turn

the heating elements Off.

When the HI-level setting is selected, the heater will
provide a boosted heat level during the first four minutes
of operation. Then, the heat output will drop to the
normal HI-level. If the HI-level setting is selected, the
system will automatically switch to LO-level after a
maximum of 60 minutes of continuous operation. At that
time, the display will change from HI to LO, indicating
the change. The LO-level setting will turn OFF automati-
cally after a maximum of 45 minutes.

NOTE:

The engine must be running for the heated seats

to operate.

Vehicles Equipped With Remote Start

On models that are equipped with remote start, the
heated seats can be programed to come on during a
remote start.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

183

Advertising