To turn off, To resume speed – Chrysler 2014 300 SRT - Owner Manual User Manual

Page 231

Advertising
background image

To Turn Off

The system will turn off and erase the set speed in
memory if:

• You push and release the ON/OFF button.
• You turn OFF the ignition.

To Resume Speed

Press the RES + button and release. Then remove your
foot from the accelerator pedal. The EVIC will display the
last set speed.

NOTE:

You can resume ACC from a minimum of

20 mph (32 km/h).

WARNING!

The Resume function should only be used if traffic
and road conditions permit. Resuming a set speed
that is too high or too low for prevailing traffic and
road conditions could cause the vehicle to accelerate
or decelerate too sharply for safe operation. Failure to
follow these warnings can result in a collision and
death or serious personal injury.

Adaptive Cruise Control (ACC) Cancelled

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

229

Advertising