Parkview® rear back up camera — if equipped, Parkview® rear back up camera, If equipped – Chrysler 2014 300 SRT - Owner Manual User Manual

Page 262

Advertising
background image

WARNING! (Continued)

Before using the ParkSense® Park Assist system, it

is strongly recommended that the ball mount and
hitch ball assembly is disconnected from the ve-
hicle when the vehicle is not used for towing.
Failure to do so can result in injury or damage to
vehicles or obstacles because the hitch ball will be
much closer to the obstacle than the rear fascia
when the warning display turns on the single
flashing arc and sounds the continuous tone. Also,
the sensors could detect the ball mount and hitch
ball assembly, depending on its size and shape,
giving a false indication that an obstacle is behind
the vehicle.

PARKVIEW® REAR BACK UP CAMERA — IF
EQUIPPED

Your vehicle may be equipped with the ParkView® Rear
Back Up Camera that allows you to see an on-screen
image of the rear surroundings of your vehicle whenever
the shift lever is put into REVERSE. The image will be
displayed on the touchscreen display along with a cau-
tion note to “check entire surroundings” across the top of
the screen. After five seconds this note will disappear.
The ParkView® camera is located on the rear of the
vehicle above the rear License plate.

When the vehicle is shifted out of REVERSE, the rear
camera mode is exited and the last selected touchscreen
appears again.

260

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising