CLEAR Hub Express Users Guide - Manual (Page 11)

10
x Network Name (SSID): Shows the CLEAR Hub Express’s Wi-Fi network name, which is
broadcast by the CLEAR Hub Express, to allow Wi-Fi-enabled devices to identify and connect to
it. The Wi-Fi network name appears on the LCD screen. The CLEAR Hub Express Wi-Fi network
name can be changed using the CLEAR Hub Express Home Page Setup Wizard. The CLEAR
Hub Express Wi-Fi network name also can be changed on the Wi-Fi Settings / Basic Tab.
x Wi-Fi Channel: Shows the channel number being used by the CLEAR Hub Express.
x Wi-Fi Range: Shows the current Wi-Fi network range setting and allows you to set the CLEAR
Hub Express for best battery life (Short), best Wi-Fi range (Long), or a balance of each (Medium).
x MAC Address: Shows the MAC (Media Access Control) Address (ID) of the CLEAR Hub
Express. A MAC Address (ID) is a unique serial number burned into network adaptors that
identifies them on a network. The CLEAR Hub Express has the ability to specify what MAC
Addresses are allowed to connect to its Wi-Fi network.
x IP Address: View the Internet Protocol (IP) Address used to locate and access your Clear Hub
Express network.
x Device Uptime: Shows the length of time (for the current period) the CLEAR Hub Express has
been connected to the CLEAR 4G network.
x Software Version: Shows the software version of the CLEAR Hub Express. The software
version cannot be changed.
x Hardware Version: Shows the hardware version of the CLEAR Hub Express.
The Navigation Bar (with links to the different tabs and links to logout, to reconnect, to reboot), the
number of connected users, signal strength, battery meter, the contextual Help link and the link to
Clearwire Support appear on every page of the CLEAR Hub Express Home Page.
Manage your CLEAR Hub Express (continued)
CLEAR Hub Express Home Page / Device Setup / Setup Wizard
The Setup Wizard guides you through the basic CLEAR Hub Express set up steps. Change the
admin password, select the time zone, choose the CLEAR Hub Express Wi-Fi network name, choose
the security type and more.
Step 1: Includes changing the admin password, which is
defaulted to
“admin”. Note: You also can change the
password on the Device Setup > Password tab at any time.
Step 1 also includes setting the time zone for your preferred
location and enabling or disabling Daylight Savings Time.
Step 2: Is where you can personalize the
CLEAR Hub Express Wi-Fi network name
(SSID) and choose the security setting.
Step 3: Is where you can select your
preferred language.