CLEAR Hub Express Users Guide - Manual (Page 16)

15
Manage your CLEAR Hub Express (continued)
CLEAR Hub Express Home Page / Wi-Fi Settings / Basic
Use this tab to view and change the basic Wi-Fi settings of your CLEAR Hub Express.
x Enable Wi-Fi: This setting is defaulted to “enable.” You may disable this setting if you only wish
to use the CLEAR Hub Express tethered to your computer. You will not be able to access the
internet via Wi-Fi with this setting disabled.
x Network Name (SSID): Shows the CLEAR Hub Express Wi-Fi network name (SSID), which is
broadcast by the CLEAR Hub Express, to allow Wi-Fi-enabled devices to identify and connect to
it.
x Authentication: Select the Wi-Fi security type that is used by the CLEAR Hub Express. Use the
Wi-Fi security settings to password-protect access to your CLEAR Hub Express Wi-Fi network.
WPA provides the most robust level of Wi-Fi security, but older devices may not support it. WEP
is supported by virtually all Wi-Fi
devices. Check your device’s user manual to find out which
types of security are supported.
x Encryption: Select the type of encryption that is used by the CLEAR Hub Express.
x Password Type: Select the type of password that is used by the CLEAR Hub Express.
x Password: View and change the password needed to access the CLEAR Hub Express’s Wi-Fi
network.
Click “APPLY” when you’re ready to change the basic Wi-Fi settings.
If you don’t want to make any changes to the basic Wi-Fi settings, click “CANCEL”.
If you’re using your CLEAR Hub Express
click
here to open the CLEAR Hub Home
Page.