CLEAR Hub Express Users Guide User Manual
Page 30
Advertising
29
Resetting Your Device
If you changed your Admin Password and
can’t remember it, you can reset your CLEAR Hub Express
to the factory settings.
Warning: Resetting your CLEAR Hub Express will reset ALL of the settings, including your Wi-Fi
network name and password.
1. Turn on the device
2. Once device is powered on, carefully insert a sturdy thin object into the hole above to the
Ethernet connector on the back side of the device and press firmly for two seconds. Remove
the thin object out of the hole
3. All LEDs will turn off except for the power LED on the front. The device will reboot with factory
default settings.
Note: The Admin default password is:
“admin”
Reset Button
Advertising