Removal and replacement preliminaries, 1 tools required, 2 service considerations – Compaq V300 User Manual
Page 89: Chapter, Emoval and, Eplacement, Reliminaries
Removal and Replacement Preliminaries
4-1
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: David Calvert Saved by: The Integrity Group Saved date: 10/26/00 11:46 AM
Pages: 6 Words: 1295 Template: c:\program files\microsoft office\templates\compaq\ref.dot
Part Number: 128679-006 File name: Ch04
chapter
4
R
EMOVAL AND
R
EPLACEMENT
P
RELIMINARIES
This chapter provides essential information for proper and safe removal
and replacement service.
4.1 Tools Required
You will need the following tools to complete the removal and
replacement procedures:
■
Magnetic screwdriver
■
Torx T-8 screwdriver
■
Phillips screwdriver (for screw securing diskette drive bezel to base
assembly on Armada V300 only)
■
7-mm hex socket (for bushing guides)
■
Tool kit (includes connector removal tool, loopback plugs, and case
utility tool)
4.2 Service Considerations
Listed below are some of the considerations that you should keep in
mind during disassembly and assembly procedures.
IMPORTANT:
As you remove each subassembly from the computer,
place it (and all accompanying screws) away from the work area to
prevent damage.