Comtrol IO-Link Master EIP-4 - Manual (Page 33)

IO-Link Master EtherNet/IP Reference Manual: 2000589 Rev. A Chapter 3. EtherNet/IP CIP Object Definitions - 33
Chapter 3. EtherNet/IP CIP Object Definitions
The following are the vendor specific CIP Object definitions as supported in the IO-Link Master:
• 3.1. IO-Link Port Information Object Definition (71 hex)
• 3.2. PDI (Process Data Input) Transfer Object Definition (72 hex) on Page 41
• 3.3. PDO (Process Data Output) Transfer Object Definition (73 hex) on Page 42
• 3.4. ISDU Read/Write Object Definition (74 hex) on Page 43
The following are standard CIP Object Definitions that are supported in the IO-Link Master.
• 3.5. Identity Object (01hex, 1 instance) on Page 45
• 3.6. Message Router Object (02 hex) on Page 48
• 3.7. Connection Manager Object (06 hex) on Page 49
• 3.8. Port Object (F4 hex-1 instance) on Page 50
• 3.9. TCP Object (F5 hex-1 instance) on Page 52
• 3.10. Ethernet Link Object (F6 hex-1 instance) on Page 54
• 3.11. PCCC Object (67 hex-1 instance) on Page 56
3.1. IO-Link Port Information Object Definition (71 hex)
The IO-Link Device Information object defines the attributes by which the PLC can request standard device
information stored in the IO-Link device’s ISDU blocks.