Cabletron Systems SEHI-22/24 - Manual (Page 18)

Using the SEHI Hub View
2-4 Using the Hub View
Clicking on the Device button displays the Device menu, Figure 2-2 .
Figure 2-2. SEHI Hub View Device Menu
The Device menu lets you perform the following:
• Open the Device Status window
• Open the Repeater Status window
• Open the Polling Intervals window
• Open the Statistics windows
• Create device-level Pie Charts, Graphs and Meters
• Change the Port Display Form
• Launch the Link/Seg Traps application
• Launch the Redundancy application
• Launch the Source Addressing application
• Launch the Security application.
Note that the Device menu does not provide access to every application which is
available to the SEHI; some information is only available from the Module or Port
menus, and several applications can only be accessed either from the icon menu
(if you are running under a network management platform) or from the
command line (if you are running in stand-alone mode). See Chapter 1,
Introduction to SPMA for the SEHI-22/24 and SEHI-32/34
, for a complete list of
applications available to the SEHI and how to access each one.