Cabletron Systems SEHI-22/24 - Manual (Page 47)

Setting Network Circuit Redundancy 4-3
Repeater Redundancy
Figure 4-2. The Channel X Redundancy Window
2. If you want to change a circuit’s name or the number of retries, highlight the
appropriate circuit and click
. The Change Circuit
window, Figure 4-3 , will appear.
Figure 4-3. The Change Circuit Window
In the appropriate boxes, enter a new circuit name (up to 16 alphanumeric
characters) and/or number of retries; Retries is the number of times the SEHI
tests the connection to the first IP address listed in the Circuit Addresses
window before it gives up and moves on to the next address. The valid range