Cabletron Systems SEHI-22/24 - Manual (Page 62)

Source Addressing
5-12 Finding a Source Address
To find a source address:
1. Click mouse button 1 on in the Source Address List window
( Figure 5-2 , page 5-3 ); the Find Source Address window, Figure 5-5 , will
appear.
Figure 5-5. Find Source Address Window
2. In the MAC Address field, enter the source address you wish to locate in a
hexadecimal (XX:XX:XX:XX:XX:XX) format.
3. Click on . If the address is in the table at the time the search is
initiated, the remaining fields in the window will display the module and port
through which the address is communicating with the SEHI. If the address is
not in the table, the message MAC Address Not Found will display in the
window. See
Figure 5-6 , page 5-13 .
NOTE
Note that each repeater channel maintains its own Source Address Table, and they are
completely independent of one another; therefore, if you search for a source address
communicating via Channel B from the Channel A Source Address List window, the
result will be a “not found,” even though the address is connected to a port in the SEHI-
controlled hub.