Cabletron Systems SEHI-22/24 - Manual (Page 79)

Enabling Security and Traps 6-15
Security
displayed in the list box; a repeater whose ports have different Security Mode
or Trap settings will display a status of “Mismatch.”
Figure 6-6. Channel A Module Security Window
3. Use the Set Security For field or the mouse to select the hub or hubs for
which you wish to configure security (note that the settings in the Set
Security For field will change automatically as you click to select or de-select
hubs).
4. In the Security Mode field, click mouse button 1 on the appropriate selection
to apply Full or Continuous lock status to all ports on the selected hubs, or to
Unlock all ports on the hubs. (Note that if your SEHI does not support the
newest security enhancements, the Continuous selection will be
unavailable.)
5. Click on the appropriate selection in the Send Trap field to Enable or Disable
traps for the selected hub(s).
6. Click on to save your changes; each hub’s current status will be
displayed in the scroll list. Click on to exit the window.
Port-level Security and Traps
To enable or disable security and/or traps at the port level: