Crosman ASP40C - Manual

Crosman Stinger P40
Airsoft Pistol 6mm Plastic BBs
OWNER’S MANUAL
READ ALL INSTRUCTIONS AND WARNINGS IN THIS
MANUAL BEFORE USING THIS AIRSOFT GUN
Distributed by
Crosman Corporation
7629 Routes 5 & 20
East Bloomfield, NY 14443
www.crosman.com
1-800-724-7486
Made in China P40-515
WARNING:
This is not a toy. Adult supervision is required. Misuse may cause serious
injury, especially to the eye. Eye protection designed for airsoft guns must be worn by the
user and any person in range. May be dangerous up to 100 yds. Read the owner’s manual
before using.
WARNING:
Do not brandish or display this airsoft gun in public – it may confuse people
and may be a crime. Police and others may think it is a firearm. Do not change the coloration
and markings to make it look more like a firearm. That is dangerous and may be a crime.
YOU AND OTHERS WITH YOU SHOULD ALWAYS WEAR EYE PROTECTION TO PROTECT YOUR EYES.
READ ALL INSTRUCTIONS AND WARNINGS IN THIS MANUAL BEFORE USING THIS AIRSOFT GUN.
BUYER AND USER HAVE THE DUTY TO OBEY ALL LAWS ABOUT THE USE
AND OWNERSHIP OF THIS AIRSOFT GUN.
Recommend 18 years or older to purchase. Intended for use by those 16 or older.
Please read this owner’s manual completely. Remember to treat this airsoft pistol with the same respect you would
a firearm. Always carefully follow the safety instructions found in this owner’s manual and keep this manual in a safe
place for future use.
If you have any questions regarding your new airsoft pistol, please contact Crosman Customer Service at: 1-800-
724-7486, 585-657-6161 or www.crosman.com.
1. Learning the Parts of Your New Airsoft Pistol
Learning the names of the parts of your new airsoft pistol will help you to understand your owner’s manual. Use this
manual to increase your enjoyment of this airsoft pistol.
Front Sight A.
Slide B.
Compensator C.
Rear Sight D.
Clip Release Lever E.
BB Clip F.
Grip Frame G.
Trigger H.
Trigger Guard I.
Safety (see Fig. 2A and 2B) J.
Muzzle K.
Your airsoft gun has been designed to be used with or without the enclosed compensator. To attach the compen-
sator, screw on the barrel tip until tight. Do not over tighten as it may damage the compensator or barrel.
2. Operating the Safety
WARNING:
Keep the airsoft gun in the “ON SAFE” position until you are ready to
shoot. Then turn the safety to the “OFF SAFE” position.
A. To Put the airsoft pistol “ON SAFE”
Locate the safety on the left hand side of the airsoft pistol. •
Push the safety all the way up so that it is toward the “S” for “ON SAFE” •
(Fig 2A). The safety is not “ON SAFE” unless it is pushed all the way up
to the “S”
Like all mechanical devices, a airsoft pistol safety can fail. Even when the
safety is “ON SAFE”, you should continue to handle the airsoft pistol safely.
NEVER point the airsoft pistol at any person. NEVER point the airsoft pistol at
anything you do not intend to shoot.
B. To Take the Airsoft Pistol “OFF SAFE”
Locate the safety on the left hand side of the airsoft pistol. •
Push the safety down pointing to the “F” for fire. (Fig 2B). The safety is •
not “OFF SAFE” unless it is pushed all the way down and to the “F” on
the receiver.
3. Loading and Unloading Plastic BBs
WARNING:
Use 6 mm airsoft BBs only in this airsoft gun. Use of any other ammunition
can cause injury to you or damage to the airsoft gun. NEVER RE-USE AMMUNITION.
A. Loading
Make sure the airsoft pistol is “ON SAFE” (section 2A). •
Point the airsoft pistol in a SAFE DIRECTION. •
While supporting the BB clip, push the clip release lever down and •
remove the clip.
Load up to 27 -6 mm plastic BBs in the front of the clip (fig 3). •
Insert the loaded clip back into the airsoft pistol until it locks in place. •
B. Unloading Plastic BBs
Make sure the airsoft pistol is “ON SAFE” (section 2A). •
Point the airsoft pistol in a SAFE DIRECTION. •
While supporting the BB clip, push the clip release lever down and •
remove the clip.
Remove the BBs from the clip by pushing each one out. •
4. Cocking your Airsoft Pistol
Make sure the airsoft pistol is “ON SAFE” (section 2A). •
Point the airsoft pistol in a SAFE DIRECTION. •
While holding the airsoft pistol in a horizontal position, cock by firmly holding the slide with your entire hand, pull- •
ing the slide rearward until it clicks and releasing in a smooth motion (Fig. 4).
You must cock the airsoft pistol before each shot. •
WARNING:
Never assume that because the airsoft gun no longer fires a plastic BB
and/or the magazine is removed, that a plastic BB is not lodged in the barrel. Always treat
the airsoft gun as though it is loaded and with the same respect you would a firearm.
5. Aiming and Firing Safely
You and others with you should always wear eye protection •
designed for airsoft to protect your eyes.
Always point your airsoft gun in a SAFE DIRECTION. •
Do not shoot at hard surfaces or at the surface of water. The plas- •
tic BBs may bounce off or ricochet and hit someone or something
you had not intended to hit.
DO NOT re-use plastic BBs because they could possibly cause •
damage to your airsoft gun.
Your airsoft gun is designed for target shooting and is suited for •
both indoor and outdoor use. Always remember to place your tar-
get carefully. THINK about what you will hit if you miss the target.
Your airsoft gun is correctly aimed when the front sight blade is •
position exactly in the notch of the rear sight. The top of the front
sight blade should be even with the top of the notch in the rear
sight. The bulls-eye should appear to rest on the
top of the front sight (Fig. 8).
When you are sure of your target and backstop, •
and the area around the target is clear, load and
cock the airsoft gun following sections 3 and 4.
Take the airsoft gun “OFF SAFE” (section 2A) aim
and pull the trigger to fire.
6. Maintaining Your Airsoft Pistol
DO NOT MODIFY OR ALTER YOUR AIRSOFT •
PISTOL. Tampering with the airsoft pistol or
attempts to change the airsoft pistol in any way
may make it unsafe to use, may cause serious
injury or death and will void the warranty.
If you drop your airsoft pistol, visually check to see •
that it works properly before you use it again. If
anything seems changed, like a shorter or weaker
trigger pull, this may mean parts are worn out or
broken. Call Customer Service at Crosman for
assistance before using your airsoft pistol again.
7. Reviewing Safety
Do not ever point the airsoft gun at any person. Do not ever point the airsoft •
gun at anything you do not intend to shoot.
Always treat the airsoft gun as though it is loaded and with the same •
respect you would a firearm.
Always aim in a SAFE DIRECTION. Always keep the muzzle of the airsoft •
gun pointed in a SAFE DIRECTION.
Always keep the airsoft gun “ON SAFE” until you are ready to shoot in a •
SAFE DIRECTION.
Always check to see if the airsoft gun is “ON SAFE” and unloaded when •
getting it from another person or from storage.
Always keep your finger off the trigger and out of the trigger guard until •
ready to shoot.
You and others with you should always wear eye protection to •
protect your eyes.
Always wear eye protection designed for airsoft over your regular glasses. •
Use 6 mm plastic BBs only. •
Do not reuse plastic BBs because they could cause possible damage to your airsoft gun. •
Do not shoot at hard surfaces or at the surface of water. The plastic BBs may bounce off or ricochet and hit •
someone or something you had not intended to hit.
Replace the backstop if it becomes worn. Place the backstop in a location that will be safe should •
the backstop fail.
Your backstop should be checked for wear before and after each use. All backstops are subject to wear and will •
eventually fail. Replace your backstop if the surface is worn or damaged or if a ricochet occurs.
Do not attempt to disassemble or tamper with your airsoft gun. •
DO NOT MODIFY OR ALTER YOUR AIRSOFT GUN. Attempts to modify the airsoft gun in any way may make •
your airsoft gun unsafe to use, cause serious injury or death and will void the warranty.
Using unauthorized repair centers or modifying the function of your airsoft gun in any way may be unsafe and •
will void your warranty.
Do not put the airsoft gun away loaded. Make sure ALL of the plastic BBs are unloaded from the airsoft gun. •
Always store this airsoft gun in a secure location. •
SPECIFICATIONS
Mechanism/Action
Spring Action
Caliber/Ammunition 6mm Plastic BBs
Magazine
Up to 27 6 mm BBs
Barrel Smooth
Safety Lever
Velocity Up to 325 fps (99 m/s)
PERFORMANCE: Many factors can affect velocity, including brand of projectile, type of projectile and barrel condition.
DO NOT RETURN THIS PRODUCT TO THE STORE.
Our friendly customer service representatives will be glad to help. You can get answers to frequently asked
questions at www.crosman.com or you can contact us directly at 1-800-7AIRGUN (1-800-724-7486)
CUSTOMER SERVICE
If your airsoft gun is not functioning, we recommend that you call Crosman Corporation Customer service at 1-800-
724-7486 or 585-657-6161. (International customers should contact their distributor.) DO NOT ATTEMPT TO
DISASSEMBLE IT! If you take it apart you probably will not be able to reassemble it correctly. Crosman assumes no
warranty responsibility under such circumstances.
For optimum performance use Crosman ammunition only. These include CROSMAN, COPPERHEAD, and BENJAMIN.
Using other than Crosman branded ammunition may cause your product to malfunction and may void your warranty.
LIMITED 30 DAY WARRANTY
This product is warranted to the retail consumer for 30 days from date of retail purchase against defects in material
and workmanship and is transferable.
WHAT IS COVERED
Replacement parts and labor. Transportation charges to consumer for repaired product.
WHAT IS NOT COVERED
Transportation charges to Crosman for product. Damages caused by abuse, modification or failure to perform nor-
mal maintenance. Any other expense. CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, OR INCIDENTAL
EXPENSES, INCLUDING DAMAGE TO PROPERTY. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITA-
TION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU.
WARRANTY CLAIMS
USA Customers: Attach your name, address, description of problem, phone number and copy of sales receipt to
product. Package and return to Crosman Corporation, Routes 5 & 20, East Bloomfield, NY 14443.
International Customers: Please return product to your nearest distributor. If you do not know your distributor, please
call 585-657-6161 and ask for our International Department for assistance.
IMPLIED WARRANTIES
ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO 30 DAYS FROM DATE OF RETAIL PURCHASE.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE
LIMITATIONS MAY NOT APPLY TO YOU.
To the extent any provision of this warranty is prohibited by federal, state, or municipal law which cannot be pre-
empted, it shall not be applicable. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
CROSMAN is a registered trademark of Crosman Corporation in the United States.