Crosman SASR30 User Manual

Owner's manual, Warning, Soft air rifle (6 mm) plastic bb

Advertising
background image

Soft Air Rifle

(6 mm) Plastic BB

OWNER'S MANUAL

READ ALL INSTRUCTIONS AND WARNINGS IN THIS

MANUAL BEFORE USING THIS SOFT AIR GUN

Instructions in French and Spanish Included

Distributed by
Crosman Corporation
Routes 5 & 20,
P.O. Box 308
E. Bloomfield, NY 14443
www.crosman.com
1-800-7AIRGUN

SASR30-515

YOU AND OTHERS WITH YOU SHOULD ALWAYS WEAR SHOOTING GLASSES TO PROTECT YOUR EYES.

READ ALL INSTRUCTIONS BEFORE USING.

BUYER AND USER HAVE THE DUTY TO OBEY ALL LAWS ABOUT THE USE AND OWNERSHIP OF THIS SOFT AIR GUN.

Please read this owner's manual completely. Remember to treat this soft air gun with the same respect you
would a firearm. Always carefully follow the safety instructions found in this owner's manual and keep this
manual in a safe place for future use.

If you have any questions regarding your new soft air gun, please contact Crosman Customer
Service at: 1-800-724-7486, 585-657-6161 or www.crosman.com.

THIS SOFT AIR GUN IS INTENDED FOR USE BY THOSE 16 YEARS OF AGE OR OLDER.

WARNING:

This is not a toy. Adult supervision required. Misuse or careless use

may cause serious injury, particularly to the eye. May be dangerous up to 100 yards
(91.44 meters).

6. Maintaining Your Soft Air Gun

• DO NOT MODIFY OR ALTER YOUR SOFT AIR GUN. Attempts to modify the soft air gun in

any way inconsistent with this manual may make it unsafe to use, cause serious injury, especially
to the eye, and will void the warranty.

• If you drop your soft air gun, check to see that it works properly before you use it again. If

anything seems changed, like a shorter or weaker trigger pull, this may mean worn out or
broken parts. Call Customer Service at Crosman for assistance before using your soft
air gun again.

7. Reviewing Safety

• Do not ever point the soft air gun at any person. Do not ever point the soft air gun at anything you

do not intend to shoot.

• Always treat the soft air gun as though it is loaded and with the same respect you would a firearm.
• Always aim in a SAFE DIRECTION. Always keep the muzzle of the soft air gun pointed in a

SAFE DIRECTION.

• Always keep the soft air gun "On Safe" until you are ready to shoot in a SAFE DIRECTION.
• Always check to see if the soft air gun is "On Safe" and unloaded when getting it from another

person or from storage.

• Always keep your finger off the trigger and out of the trigger guard until ready to shoot.
• You and others with you should always wear shooting glasses to protect your eyes.
• If your reading or prescription glasses are not safety glasses, make sure you wear shooting

glasses over your regular glasses.

• Use .24 caliber (6 mm) plastic BBs only.
• Do not shoot at hard surfaces or at the surface of water. The plastic BBs may bounce off or

ricochet and hit someone or something you had not intended to hit. If the plastic BBs should
happen to hit a hard surface, do not reuse those plastic BBs because they could cause possible
damage to your soft air gun.

• Replace the backstop if it becomes worn. All backstops are subject to fail, place the backstop in a

location that will be safe should the backstop fail.

• Do not attempt to disassemble or tamper with your soft air gun. Call Customer Service at

Crosman Corporation for repair. Using unauthorized repair centers or modifying the function
for your airgun in any way may be unsafe and will void your warranty.

• Do not put the soft air gun away loaded. Make sure ALL of the plastic BBs are unloaded

from the soft air gun.

• Always store this soft air gun in a secure location.

SPECIFICATIONS

PERFORMANCE: Many factors can affect velocity, including brand of projectile, type of projectile
and barrel condition.

Mechanism/Action

Spring Air Repeater

Caliber/Ammunition 6mm plastic BBs

Magazine

Up to 272 plastic BBs

Weight

19.2 oz. (.54 kg)

Overall Length

17 in. (43.18 cm)

Sights

Front Blade

Rear Peep

Barrel Length

7.5 in. (19.05 cm)

Barrel Material

Smooth bore, aluminum

Safety

Lever

Velocity

Up to 230 fps (70 m/s)

REPAIR SERVICE
If your soft air gun needs repair, we recommend that you call Crosman Corporation Customer service at
1-800-724-7486 or 585-657-6161. (International customers should contact their distributor.) DO NOT
ATTEMPT TO DISASSEMBLE IT! Your soft air gun requires special tools and fixtures to repair it. If you
take it apart you probably will not be able to reassemble it correctly. Crosman assumes no warranty
responsibility under such circumstances.

LIMITED 30 DAY WARRANTY
This product is warranted to the retail consumer for 30 days from date of retail purchase against
defects in material and workmanship and is transferable.

WHAT IS COVERED
Replacement parts and labor. Transportation charges to consumer for repaired product.

WHAT IS NOT COVERED
Transportation charges to Crosman. Damages caused by abuse, modification or failure to perform normal
maintenance - see Step 6. Any other expense. CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES,
OR INCIDENTAL EXPENSES, INCLUDING DAMAGE TO PROPERTY. SOME STATES DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

WARRANTY CLAIMS
USA Customers: Attach your name, address, description of problem, phone number and copy of
sales receipt to product. Package and return to Crosman Corporation, Rts. 5 & 20, E. Bloomfield, NY 14443.
Canadian Customers: Follow packaging procedures above and send to Crosman Parts & Service
Depot, 611 Neal Drive, Peterborough, Ontario, K9J 6X7 Canada.
International Customers: Please return product to your nearest distributor. If you do not know your
distributor, please call 585-657-6161 and ask for our International Department for assistance.

IMPLIED WARRANTIES
ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO 30 DAYS FROM
DATE OF RETAIL PURCHASE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

To the extent any provision of this warranty is prohibited by federal, state, or municipal law which cannot be preempted,
it shall not be applicable. This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.

CROSMAN is a registered trademark of Crosman Corporation in the United States.

1. Learning the Parts of Your New Soft Air Gun.
Learning the names of the parts of your new soft air gun will help you to understand your owner's manual. Use this
manual to increase your enjoyment of this soft air gun.

2. Operating the Safety

2.1 To Put the Soft Air Gun "ON SAFE":

• Locate the safety on the left hand side of the soft air gun, above the trigger. (Fig. 2)
• Push up on the safety until it is horizontal and pointing to the “S” on the receiver .

Even when the safety is "On Safe", you should continue to handle the soft air gun

safely. Do not ever point the soft air gun at anything you do not intend to shoot.

2.2 To take the Soft Air Gun "OFF SAFE":

• Locate the safety on the left side and push down on the safety until it is pointing to

the “F” on the receiver. The soft air gun is ready to fire when "OFF SAFE".

3. Loading and Unloading Plastic BBs

3.1 Loading Plastic BBs

• Make sure the soft air gun is "On Safe" (See Step 2.1).
• Point the soft air gun in a SAFE DIRECTION.
• Push in on the release lever, toward the magazine and pull down on the entire magazine until it is free from

the soft air gun(Fig. 3).

• Turn the magazine upside down, so the loading port is facing down, and slide the resevoir door open. Load

up to 250 BBs and slide the resevoir door closed (Fig. 4).

• While holding the magazine at an angle, with the loading port facing down, pull back on the loading spring

until it locks into place.

• Shake the magazine to load up to 22 plastic BBs into the clip and slowly release the loading spring until it

meets the plastic BBs(Fig. 5).

• Turn the magazine back over, with the loading port up, and insert the loaded magazine back into the soft air

gun until you hear it click, indicating the magazine is locked securely in place.

3.2 Unloading the Plastic BBs

• Make sure the soft air gun is "On Safe" (See Step 2.1), and pointed in

a SAFE DIRECTION.

• Push in on the release lever, toward the magazine and pull down on

the entire magazine until it is free from the soft air gun (Fig. 3).

• Pull down on the loading spring and the plastic BBs will release from

the clip into the resevoir.

• Turn the magazine upside down and slide the resevoir door open.

Pour the remaining plastic BBs out (Fig. 6).

• Insert the empty magazine back into the soft air gun until you hear it click, indicating the magazine is

locked securely in place.

WARNING

:

Never assume that because the soft air gun no longer fires a plastic BB and/or

the magazine is removed, that a plastic BB is not lodged in the barrel. Always treat the soft air gun
as though it is loaded and with the same respect you would a firearm.

WARNING

:

Use .24 caliber (6 mm) plastic BBs only in this soft air gun. Use of any

other ammunition can cause injury to you or damage to the soft air gun.

WARNING:

Keep the soft air gun in the "ON SAFE" position until you are actually

ready to shoot. Then push the safety to the "OFF SAFE" position.

Safety

Grip
Frame

Trigger

Rear Sight

Barrel

Front Sight

Muzzle

Magazine

Magazine

Release

Lever

Pumping

Handle

Fig. 1

Fig. 2

4. Aiming and Firing Safely

• You and others with you should always wear shooting glasses to protect your eyes.
• Always point your soft air gun in a SAFE DIRECTION.
• Put one hand on thte grip frame and with the other pull back the

pumping handle until it stops, then push forward to release(Fig. 7).
Note: You must pump the soft air gun to load every shot.

• When you are sure of your target and backstop, and the area around the

target is clear, take "Off Safe" (See Step 2.2).

• Aim the gun and pull the trigger.
• Your soft air gun is designed for target shooting and is suited for both

indoor and outdoor use. Always remember to place your target carefully.
THINK about what you will hit if you miss the target.

• The soft air gun is correctly aimed when the front sight blade is positioned

exactly in the center of the rear peep sight. The bulls-eye should appear to
rest on the top of the front sight. (Fig. 8)

5. Using the "Full-Auto" Trigger

• When you are sure of your target and backstop, and the area around

the target is clear, take "Off Safe" (See Step 2.2).

• Squeeze and hold the trigger; at the same time pull and return the pumping

handle continuously (Fig. 6).

• The soft air gun will continue to fire a plastic BB each time the pumping handle is pulled and returned,

until trigger is released.

• Be sure to keep soft air gun aimed in a safe direction.

Fig. 7

Fig. 8

Fig. 3

Fig. 4

Resevoir

Loading

Port

Loading

Spring

Resevoir

Door

Clip

Loading

Spring

Lock

Fig. 5

Fig. 6

Fig. 1A:

Exploded View of Magazine

Advertising