Crosman SASS34 - Manual

Crosman Stinger S34
Model SASS34
6 mm Airsoft Gun
OWNER’S MANUAL
Distributed by
Crosman Corporation
7629 Routes 5 & 20
East Bloomfield, NY 14443
www.crosman.com
1-800-724-7486
Made in China SASS34B515
WARNING:
This is not a toy. Adult supervision is required. Misuse may cause
serious injury, especially to the eye. Eye protection designed for soft air guns
must be worn by the user and any person in range. May be dangerous up to 100
yds. Read the owner’s manual before using.
WARNING:
Do not brandish or display this soft air gun in public – it may con-
fuse people and may be a crime. Police and others may think it is a firearm. Do
not change the coloration and markings to make it look more like a firearm. That
is dangerous and may be a crime.
READ ALL INSTRUCTIONS AND WARNINGS IN THIS MANUAL BEFORE USING THIS AIRSOFT GUN.
BUYER AND USER HAVE THE DUTY TO OBEY ALL LAWS ABOUT THE USE AND OWNERSHIP OF THIS AIR-
SOFT GUN.
Recommend 18 years or older to purchase. Intended for use by those 16 or older.
Please read this owner’s manual completely. Remember to treat this airsoft gun with the same respect you would
a firearm. Always carefully follow the safety instructions found in this owner’s manual and keep this manual in a
safe place for future use.
If you have any questions regarding your new airsoft gun, please contact Crosman Customer Service at: 1-800-
724-7486, 585-657-6161 or www.crosman.com.
1. Learning the Parts of Your New Airsoft Gun
Learning the names of the parts of your new airsoft gun will help you to understand your owner’s manual. Use
this manual to increase your enjoyment of this airsoft gun.
A Muzzle
B Front Sight
C Forearm (Pump)
D Rear Sight
E Trigger
F Trigger Guard
G Loading Port
H Shot shell
I Loading port release button
J Safety (see Fig. 2)
2. Operating the Safety
A. To put the airsoft gun “ON SAFE”
• Locate the safety directly in back of the trigger.
• Push the safety from the left side all the way in (Fig. 2). The safety is not
“ON SAFE” unless it is pushed all the way in and the RED ring around
the left side of the safety is NOT showing.
WARNING:
Keep the soft air gun in the “ON SAFE” position until you are actually
ready to shoot. Then turn the safety to the “OFF SAFE” position.
Like all mechanical devices, a airsoft gun safety can fail. Even when the safety
is “ON SAFE”, you should continue to handle the airsoft gun safely. NEVER
point the airsoft gun at any person. NEVER point the airsoft gun at anything
you do not intend to shoot.
B. To Take the Airsoft Gun “OFF SAFE”
• Push the safety from the right side all the way in.
• The airgun is ready to fire when “OFF SAFE.” When you can see the
RED line on the left side of the safety, the airgun is “OFF SAFE” and
can be fired.
3. Loading and Unloading Plastic BBs
NOTE: For optimum performance Crosman recommends using only Crosman
brand BBs.
A. Filling and installing the shot shell (magazine)
• Make sure the airsoft gun is “ON SAFE” (section 2A) and pointed in a SAFE DIRECTION.
Load the Speedloader
• Push down the spring rod and lock in place.
• Open the door and fill with 6mm airsoft BBs.
• Close the door and release the spring rod.
Fill the Shot Shells
• Align the tip of the loaded speedloader with the hole in the shot shell (magazine).
• Push the spring rod to load pellets into the magazine. Repeat this process until the magazine is full.
Load the Shot Shell into the Gun
• Push the loading port release button toward the back of the gun. This will open the door.
• Insert the shot shell, nose first, into the loading chamber and lock in place.
• Close the loading port door.
WARNING: Use 6 mm plastic BBs only in this soft air gun. Use of any other am-
munition can cause injury to you or damage to the soft air gun.
B. Unloading Plastic BBs
• Make sure the airsoft gun is “ON SAFE” (section 2A).
• Point the airsoft gun in a SAFE DIRECTION.
• Slide the loading port release button toward the back of the gun. This will open the door and eject the
shot shell.
• Point the airsoft gun in a SAFE DIRECTION, take “OFF SAFE” and fire the gun in a safe direction until no
more BBs fire.
• Put the airsoft gun back “ON SAFE”.
WARNING: Never assume that because the soft air gun no longer fires a BB and/
or the loading chamber is removed, that a BB is not lodged in the barrel. Always treat
the soft air gun as though it is loaded and with the same respect you would a firearm.
4. Pumping your Airsoft Rifle
WARNING: Always hold the forearm firmly when you pump it to prevent possible injury
• Make sure the airsoft gun is “ON SAFE”
(section 2A).
• Point the airsoft gun in a SAFE DIRECTION.
• Holding the forearm firmly, pull it all the way
back. Do not twist the forearm while pumping.
Use a straight stroke to prevent breakage.
Note: you must do this to fire every shot.
Using the Slam-Fire Feature
• Your airsoft gun is designed with the slam fire feature. This feature allows you to continue to fire the gun
using the pumping mechanism.
• When you are sure of your target and backstop, and the area around the target is clear, take the soft
air gun “OFF SAFE.”
• Squeeze and hold the trigger; at the same time pull and return the forearm continuously (Fig 3).
• The airsoft gun will continue to fire a BB each time the forearm is pulled
and returned, until the trigger is released.
5. Aiming and Firing Safely
• You and others with you should always wear eye protection designed for
airsoft to protect your eyes.
• Always point your airsoft gun in a SAFE DIRECTION.
• Do not shoot at hard surfaces or at the surface of water. The plastic
BBs may bounce off or ricochet and hit someone or something you had
not intended to hit.
• DO NOT re-use plastic BBs because they could possibly cause damage
to your airsoft gun.
• Your airsoft gun is designed for target shooting and is suited for both in
door and outdoor use. Always remember to place your target carefully.
THINK about what you will hit if you miss the target.
• Your airsoft gun is correctly aimed when the bulls-eye appears to rest on
the top of the front sight (fig. 4).
• When you are sure of your target and backstop, and the area around the target is clear, load and charge the
airsoft gun following sections 3 and 4. Take the airsoft gun “OFF SAFE” (section 2A) aim and pull the trigger
to fire.
6. Maintaining Your Airsoft Gun
• DO NOT MODIFY OR ALTER YOUR AIRSOFT GUN. Tampering with the airsoft gun or attempts to change
the airsoft gun in any way may make it unsafe to use, may cause serious injury or death and will void
the warranty.
• If you drop your airsoft gun, visually check to see that it works properly before you use it again. If anything
seems changed, like a shorter or weaker trigger pull, this may mean parts are worn out or broken. Call
Customer Service at Crosman for assistance before using your airsoft gun again.
7. Reviewing Safety
• Do not ever point the airsoft gun at any person. Do not ever point the airsoft gun at anything you do
not intend to shoot.
• Always treat the airsoft gun as though it is loaded and with the same respect you would a firearm.
• Always aim in a SAFE DIRECTION. Always keep the muzzle of the airsoft gun pointed in a SAFE DIRECTION.
• Always keep the airsoft gun “ON SAFE” until you are ready to shoot in a SAFE DIRECTION.
• Always check to see if the airsoft gun is “ON SAFE” and unloaded when getting it from another person or
from storage.
• Always keep your finger off the trigger and out of the trigger guard until ready to shoot.
• You and others with you should always wear eye protection to protect your eyes.
• Always wear eye protection designed for airsoft over your regular glasses.
• Use 6 mm plastic BBs only.
• Do not reuse plastic BBs because they could cause possible damage to your airsoft gun.
• Do not shoot at hard surfaces or at the surface of water. The plastic BBs may bounce off or ricochet and hit
someone or something you had not intended to hit.
• Replace the backstop if it becomes worn. Place the backstop in a location that will be safe should the
backstop fail.
• Your backstop should be checked for wear before and after each use. All backstops are subject to wear
and will eventually fail. Replace your backstop if the surface is worn or damaged or if a ricochet occurs.
• Do not attempt to disassemble or tamper with your airsoft gun.
• DO NOT MODIFY OR ALTER YOUR AIRSOFT GUN. Attempts to modify the airsoft gun in any way may
make your airsoft gun unsafe to use, cause serious injury or death and will void the warranty.
• Using unauthorized repair centers or modifying the function of your airsoft gun in any way may be unsafe and
will void your warranty.
• Do not put the airsoft gun away loaded. Make sure ALL of the plastic BBs are unloaded from the airsoft gun.
• Always store this airsoft gun in a secure location.
SPECIFICATIONS
Mechanism/Action Pump
Power Source Spring
Caliber/Ammunition 6mm Plastic BBs
Magazine Up to 30 6mm BBs
Safety Cross Bolt
Velocity Up to 360 fps
PERFORMANCE: Many factors can affect velocity, including brand of projectile, type of projectile and barrel
condition.
DO NOT RETURN THIS PRODUCT TO THE STORE.
Our friendly customer service representatives will be glad to help. You can get answers to frequently asked
questions at www.crosman.com or you can contact us directly at 1-800-7AIRGUN (1-800-724-7486)
CUSTOMER SERVICE
If your airsoft gun is not functioning, we recommend that you call Crosman Corporation Customer service at
1-800-724-7486 or 585-657-6161. (International customers should contact their distributor.) DO NOT ATTEMPT
TO DISASSEMBLE IT! If you take it apart you probably will not be able to reassemble it correctly. Crosman as-
sumes no warranty responsibility under such circumstances.
For optimum performance use Crosman ammunition only. These include CROSMAN, COPPERHEAD, and BEN-
JAMIN. Using other than Crosman branded ammunition may cause your product to malfunction and may void
your warranty.
LIMITED 30 DAY WARRANTY
This product is warranted to the retail consumer for 30 days from date of retail purchase against defects in mate-
rial and workmanship and is transferable.
WHAT IS COVERED
Replacement parts and labor. Transportation charges to consumer for repaired product.
WHAT IS NOT COVERED
Transportation charges to Crosman for product. Damages caused by abuse, modification or failure to perform
normal maintenance. Any other expense. CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, OR INCI-
DENTAL EXPENSES, INCLUDING DAMAGE TO PROPERTY. SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLU-
SION MAY NOT APPLY TO YOU.
WARRANTY CLAIMS
USA Customers: Attach your name, address, description of problem, phone number and copy of sales receipt
to product. Package and return to Crosman Corporation, Routes 5 & 20, East Bloomfield, NY 14443.
International Customers: Please return product to your nearest distributor. If you do not know your distributor,
please call 585-657-6161 and ask for our International Department for assistance.
IMPLIED WARRANTIES
ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO 30 DAYS FROM DATE OF RETAIL PURCHASE.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
To the extent any provision of this warranty is prohibited by federal, state, or municipal law which cannot be
preempted, it shall not be applicable. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
CROSMAN is a registered trademark of Crosman Corporation in the United States.