D.A.S. Audio Variant Series Manual - Manual (Page 7)

SYSTEM DESCRIPTION
The system includes 3m of connection wire ready to use in the application. If more than 3m of connection
wire is required, a longer cable can be used. If so proceed as follows:
1.- Unscrew the four screws from the rear part of the enclosure, removing the existing cable.
2.- Connect the new cables and adjust the rear cover in the holes as shown. Make sure you
connect the enclosure with the correct polarity.
7
3.- Fix the cover on the rear part of the enclosure with the four screws mentioned in the first step.
Manual del Usuario / VA series / User’s Manual