D.A.S. Audio Aero 40A Rigging - Manual (Page 22)

22 Manual de Colgado / aero 40 / Rigging Manual
After placing the group over the platform
proceed to reset the angles to 0º because is the
safest way to transport.
As we saw in pages 13 and 14, start to assign
the angles from the top.
When you complete the group of 4 units
remove from the rest (see side figure).
This group, with 0º angulation, is easy to
transport.
Note: Push the group from the sides.
Before transport, don´t forget to hide the top
rods.
Remove the security pin from “FIX ANGLE”
and place it in “STORE”.
Referring to the front rod, move up the side
control and, holding it, push the rod (as you see in
the right figure). The control will come back
automatically to its position.
Similarly, we proceed to remove the rest of the
groups and, at last, remove the AX.