D.A.S. Audio LX-218A User Manual
Page 11
CONNECTIONS
5
INPUT
POWER
SUPPLY
L
IN
K
L
IN
K
L
IN
K
L
IN
K
L
IN
K
L
IN
K
INPUT
SIGNAL INPUT
L
IN
K
POWER
SUPPLY
POWER
SUPPLY
0
I
DAS AUDIO
Self-powered systems connection
The illustration below show a typical diagram for connecting this system to other powered units. In this
four-way configuration and the sub-bass frequencies are handled by
LX-218A units while the low, medium and
high frequencies are handled by
aero 38A units. An external processor is required to time-align the sub-bass
and low frequencies by adding delays. Additional equalization or filtering are not required.
As can bee seen, the
aero 38A units are connected using the loop thru’s on both the mains supply as well
as the signal. In the case of the
LX-218A, only the signal can be looped thru, power must be supplied to each
unit independently.
EN
Manual del Usuario /
/ User’s Manual
LX-218A