Citizen Systems CBM-231 User Manual
Page 45
CBM-230/231 User’s Manual
40
CITIZEN
(21) Printing and feeding the paper by n-lines (ESC d n)
Code : [1B]h + [64]h + n
* {0
≤
n
≤
FF}
The data is described with the hexadecimal code.
Prints the data in the print buffer and feeds the paper by n-lines.
•
A set rate does not remain.
•
The beginning of the line is assumed to be the next printing start position.
(22) Generating the specified pulses (ESC p m n1 n2)
Code : [1B]h + [70]h + m + n + n2
* {m = Connector pin number (refer to the table below)}
{0
≤
n1
≤
FF}
{0
≤
n2
≤
FF}
The data is described with the hexadecimal code.
The signals specified by n1 and n2 are output to the connector pin.
•
The bit of "m" (m0) has the followings meanings.
m0
Type
0
Drawer kick pin No. 2
1
Drawer kick pin No. 5
•
The ON time is n1
×
2 ms, and OFF time as n2
×
2 ms.
•
When "m" is beyond a defininication range, n0 signal is output, discarding n1 and n2.
•
A drawer drive duty is as follows.
(Take OFF time should be 4 times or more longer than the ON time.)
ON Time
On time + OFF time
≤
0.2