Drawmer MX60 Pro Front End One - Manual (Page 17)

TECHNICAL SPECIFICATIONS
(Measurements taken using +4dBu balanced input where applicable)
INPUT IMPEDANCE 20KS (bal), 20KS (unbal)
MAXIMUM INPUT LEVEL +21dBu
LINE INPUT CMR Better than !40dB (20Hz - 22KHz)
OUTPUT IMPEDANCE 100S
MAXIMUM OUTPUT LEVEL +20dBu
BANDWIDTH 16Hz to 28KHz !1dB
NOISE
ref +4dBu
Wideband
(worst case)
22Hz - 22KHz
AV !85dB !90dB
DISTORTION
Typical Input 100Hz 1KHz 10KHz
Unity Gain
(+4dBu input, +19dBu output) < 0.05% < 0.05% <0.05%
POWER REQUIREMENTS 115Volt or 230Volt at 50-60Hz, 15VA
FUSE RATING T63mA for 230Volt, T125mA for 115Volt
CONFORMING TO IEC 127-2
FUSE TYPE 20mm x 5mm, Class 3 Slo-Blo, 250Volt
working
CASE SIZE 482mm (w) x 44mm (h) x 200mm (d)
WEIGHT (incl packaging) 3.2 Kgs
17