Ecler CA‐NET - Manual (Page 6)

CA‐NET Protocol
page 6 / 33
 <Error ID> is a numerical value for an error code.

“<Error Description>” is a text chain inside double quotation marks, containing an error
description.
DAM514 NOTES:

<RemoteMode> parameter
Originally designed to connect WPmVOL‐SR (or WPTOUCH) wall panels to the REMOTE ports
in the DAM514: panels that include a volume control knb and a 5‐position selector knob.
The possible working modes (
REMOTE_MODE command) of any of the 4 available remote
ports (R1 to R4) in the unit are:
o DISABLED
o IN_VOL: volume control for one or several inputs (general input volume, affecting all
the post processing)
o ZONE_VOL: volume control for one or several zone outputs
o IN_SEL: one input (source) selection for one or several output zones (with the 5
position selector)
o IN_SEL_IN_LEVEL: one input (source) selection for one or several output zones (with
the 5 position selector) + the control of the selected input’s crosspoints level to the
destination zones
o IN_SEL_ZONE_VOL: one input (source) selection for one or several output zones
(with the 5 position selector) + the control of the affected zones output volume
o PRESET: a preset recovery, from P1 to P5 (with the 5 position selector)
o PRESET_ZONE_VOL: a preset recovery, from P1 to P5 (with the 5 position selector) +
volume control for one or several zone outputs
 PAGER / DUCKER parameter for TALKOVER_MODE command:
o INPUT 5 can be used with the Talkover feature in PAGER or DUCKER mode. PAGER
mode requires an external paging station (MPAGE4) to select the destination zones
and performing the paging
o INPUT 4 can be used with the Talkover feature just in DUCKER mode