Ecler CA40 - Manual (Page 50)

50
8. TECHNICAL CHARACTERISTICS 8. CARACTERÍSTICAS TÉCNICAS
8. CARACTÉRISTIQUES TECHNIQUES 8. TECHNISCHE DATEN
POWER STEREO
2x18W@4  1% THD
2x22W@4  10% THD
2x10W@8  1% THD
2x12W@8  10% THD
BRIDGE 1x36W@8  1% THD
1x44W@8  10% THD
Frequency response 20Hz - 50kHz (-3dB)
THD+Noise @ 1kHz Full Pwr. SPKR OUT <0.15%
THD+Noise AUX OUT <0.02%
Channel crosstalk @ 1kHz >55dB
Inputs Sensitivity nom/Impedance LINE 1 0dBV (-6dBV*)/>8k 
LINE 2 0dBV (-6dBV*)/>8k 
MIC (BAL) -20 to -50dBV/>1k 
CMRR MICRO (BAL) >65dB @ 1kHz
Outputs Level/Minimum Load AUX OUT -6dBV/10k 
Tone control (LINE & MIC) BASS 100Hz ±10dB
TREBLE 6KHz ±10dB
Signal Noise Ratio LINE >85dB
MIC (BAL) >65dB
Talkover TIME 2 Sec**
DEPTH -30dB**
Microphone Noise Gate 20-30 below max.**
Phantom voltage +24VDC/10mA max.*
RS-232 BAUD RATE 9600 (fixed)
DATA 8 bits
PARITY NONE
STOP BITS 1
FLOW CTRL NONE
ANALOG REMOTE (0-10V. based) Volume & Input selection
INFRARED REMOTE Volume & Mute
Mains (using Meanwell GS60A24-P1J) 90-264VAC 47-63Hz
Power consumption (pink noise, 1/8 power @ 4ohm) 21VA/7W
Power consumption (pink noise, 1/3 power @ 4ohm) 32VA/13W
Power consumption Stand By (time 2 minutes) <3W
Dimensions WxDxH 155x155x45mm
Weight 650g
*Internally selectable **Software selectable