Canon DR-6010C - Manual (Page 28)

24 Basic Operation
IMPORTANT
There is a load limit mark ( ) on the document guides. Do not
stack documents higher than this mark (approximately 100 sheets of
20 lb bond (80 g/m
2
) paper.) Doing so may cause a paper jam.
5
Adjust the document guides to fit the width of the document.
Note
Before scanning, make sure that the document is not curled or
creased, and that it is placed in the feed tray correctly. Scanning an
improperly placed, curled, or creased document may damage the
document or cause a paper jam.
6
Start scanning.
IMPORTANT
• If feeding stops due to a system error or paper jam while the
scanner is scanning, resolve the problem, make sure that the
scanned image of the last page that was successfully fed has
been stored, and then resume scanning the remaining document
pages.
• Note that documents that are printed on thin paper may fall out of
the document eject tray.