Canon DR-6010C - Manual (Page 34)

30 Basic Operation
• Scan Job
The scanning conditions and scan mode (Scan Batch to File, Scan
Batch to Print, or Scan Batch to Mail) are registered in advance as a
job. The scan job can then be performed by selecting the registered job
from the drop-down list (a) or by pressing (Scan Job) on the toolbar
(b.)
Note
The following two scan jobs are already registered.
• Color Document
Scan the document using 24-bit color, simplex, at 300 dpi
resolution, and save the file in the folder [Pictures] under the folder
[Documents].
• Binary Document
Scan the document in black-and-white, simplex, at 200 dpi
resolution, and save the file in the folder [Pictures] under the folder
[Documents].
• Scan To Presentation
This mode is useful when the scanner is used in environments, such as
conference halls, where it can be connected to large displays or
projectors. CapturePerfect 3.0 is switched to full-screen display, the
document is scanned, and the scanned image is displayed at full size
on the screen.
b a
DR-6010C
Projector
The scanned image is
projected on the screen.