Envion CA200 - Manual (Page 4)

3 4
IMPORTANT WARNINGS
Before using your Ionic Pro ® Compact ionic air
purifier, please read the following
important information.
First, please look at the “Main Parts”
diagram and locate the part labeled A.
These are the collection blades and are a
vital part of this amazing ionic air purifying
system.
The collection blades are where unhealthy
pollutants, allergens and irritants are trapped
when the Ionic Pro ® Compact ionic air
purifier is in proper working condition and
in use.
The Ionic Pro ® Compact ionic air purifier
is designed to run quietly and requires very
little time and effort to maintain in proper
working condition. If you hear excessive
noise or static coming from your Ionic
Pro ® Compact ionic air purifier, it generally
indicates that the product needs to be
cleaned. Turn off your Ionic Pro® Compact
ionic air purifier, unplug the cord and
carefully follow the cleaning instructions in
the “CLEANING & MAINTENANCE”
section of this manual.
If the product is still making excessive
noise after cleaning and thoroughly drying
the collection blades and re-inserting
them as described in the “CLEANING &
MAINTENANCE” section of this manual,
turn off and unplug the unit. After you have
turned off and unplugged the unit,
see Diagram B or F for the location of
the Wire Cleaning Mechanism. Lift and
lower the Wire Cleaning Mechanism
three to four times to thoroughly
clean the internal ionizing wires (see
Diagram H in the “CLEANING &
MAINTENANCE” section). This
movement helps to scrape free particles
from the internal ionizing wires. To
keep your Ionic Pro® Compact ionic
air purifier working properly, it will
be necessary to clean the collection
blades after every month of use and
the internal ionizing wires after every
two weeks of use (see “CLEANING
& MAINTENANCE” and “DEEP
CLEANING” section of this manual for
the proper techniques).
WARNING: After cleaning the collection blades (see
“cleaning and maintenance” section) with soap
and water, allow at least 24 hours for the collection
blades to dry thoroughly before inserting them back
into the unit. Water can easily get trapped along
the collection blades’ many surfaces and edges and
damage could result if there is any moisture on the
collection blades.
You will need to clean your Ionic Pro ® Compact
ionic air purifier more often if it has been exposed
to heavy pollution.
C.
A. COLLECTION BLADES
B. OPERATING PANEL
TOP OF COLLECTION BLADES
G.
Collection
Blades’ Handle
WIRE CLEANING
MECHANISM
REMOVABLE
CAP
See A for view of
collection blades alone.
Main Parts
D.
E.
F.
C. OUTER CASE HOUSING
D. AC CORD
E. BASE
F. WIRE CLEANING MECHANISM
G. REMOVABLE CAP
Do not place Ionic Pro® Compact ionic air purifier near a fireplace. Even if a fireplace is not in use, chimney dust and soot may
circulate through the Ionic Pro® Compact ionic air purifier and then re-circulate and leave a residue on the unit and surrounding areas.
We recommend not placing the Ionic Pro® Compact ionic air purifier anywhere near candles or oil lamps. If you intend to use candles
or oil lamps near the Ionic Pro® Compact ionic air purifier despite this warning, make sure that the wicks are cut to no more than a
quarter inch to cut down on smoke production.
IMPORTANT WARNINGS IMPORTANT WARNINGS
CA200_ENV_050511.indd 3-4 5/10/11 10:08 AM