Envion AP200 - Manual (Page 7)

AP200 AP200
cleAning & mAintenAnce
Cleaning External Surfaces
1. Turn off and unplug unit.
2. Use a washcloth slightly dampened with a little water and dishwashing soap
to wipe the outer case surfaces.
3. Do not allow water to slip into the internal parts as this could damage your unit
and result in electrical shock and injury to you.
4. Allow the unit to thoroughly dry before use.
troubleshooting
PROBlEM REASON SOlUTION
Unit will not operate.
Reduced airflow or
poor filtering.
Control Dial not turned to
ON position.
Unit is unplugged.
The inlet grill has not been
installed & locked into place.
The inlet or outlet grill may
be blocked.
True HEPA filter may
be clogged.
Turn the Control Dial
clockwise.
Check to ensure unit
is plugged in.
Check to make sure filter
is properly installed & locked
into place.
Check to ensure nothing is
blocking air inlet & air outlet.
Replace with a new True HEPA
filter, if necessary.
10 11