Cambridge Audio Azur 640H - Manual (Page 13)

3.6 Testing your Music folder to see if it is shared over a
Network
Now you know the basic connection is working, you then need to test to
make sure you have shared your music folder correctly on your Vista PC.
To do this, carry out the following:
1. Select “Start” and then select “Run”.
2. In the run prompt type: \\computer name\music folder name where
computer name is the name you have given to the PC as described in
section 3.4.2, and music folder name is the shared name of your
music folder as described in section 3.4.3:
If you get your music folder contents appear in a new window then you
have set-up the folder share correctly:
If you don’t, then you need to go back over the steps above and re-
check.
3.7 Changing the 640H Name
As with a PC, the 640H needs to have a unique name over the network.
This name by default is “Azur” and is located in Settings/System/System
Info/Unit Name menu of the 640H.
It is recommended to change this name to a simple one word name with
no spaces or special characters, i.e. the room where the 640H is
situated (i.e. lounge). If the 640H and PC are in the same room, then
please use a suitable one word alternative.
Note: By default, the folder where all your music content is placed is
called “media”. Please see “Accessing the 640H from a PC” section for
more information.
3.8 Adding Content to your 640H from your PC
Now your 640H and PC are set-up for network communications, the last
step is to actually get the content of your PC accessible via the 640H.
1. In the main menu of the 640H, select “Settings” in the left hand
menu:
2. In the right hand menu that appears, select “System”:
3. Now select “Content”:
4. In the “Content Settings” menu (Rescan Location), select “Add
Location”:
5. This now brings up four settings that you can change: Friendly name,
File location, User name and Password.
640H azur
13