Cambridge Audio Azur 640H - Manual (Page 7)

640H azur
7
3.3 Setting up the IP address for the 640H
If you are using Dynamic DHCP IP addressing, the 640H is defaulted to
receive an IP address and you can skip this step. If you wish to set-up a
static IP for the 640H, then follow these instructions:
1. In the main menu, select "Settings" in the left hand menu:
2. In the right hand menu that appears, select "System":
3. Now select "Product":
4. Select "Network":
In most situations this connection is called “Local Area Connection”
however it may be called “Local Area Connection 1”, “Local Area
Connection 2” etc depending on your network set-up.
7. In the window that appears, select “Internet Protocol Version 4
(TCP/IPv4)” and then click on the “Properties” button:
8. The following window that appears is split up into two sections; The IP
address set-up and DNS set-up. In the IP address set-up there are two
options; “Obtain an IP address automatically” and “Use the following
IP address”. The DNS set-up should be as specified by your “Internet
Service Provider” (ISP).
9. Select the option “Use the following IP address”.
10. This should then un-grey the following input boxes: “IP address,”
“Subnet mask” and “Default gateway”.
11. The IP address can be entered as any group of numbers as long as
they match the rest of your network. The preferred method is
192.168.0.X where X is a number unique to the device, i.e. PC,
between 1 and 254. The full stop’s (.) are in the text box by default.
12. The Subnet mask should be set to 255.255.255.0. Windows should
set this by default when selected. The full stop’s (.) are in the text
box by default.
13. The Default gateway is the device that is controlling the internet
connection. In the text box, you need to type the IP address of this
device:
By convention, X for the Default gateway is 1. So using 192.168.0.X,
the default gateway should be set to 192.168.0.1 in the text box.
14. Click OK and the window will close (this may take a little time as the
computer needs to set the information you have provided). Click OK
on the corresponding windows.
This process is now complete.