Machine description and included contents, Assembly of the machine – Fieldmann FZN 4001-A User Manual
Page 8
EN
7
FZN 4001-A / FZN 4002-AT
Machine description and included contents | Assembly of the machine
3. MACHINE DESCRIPTION AND INCLUDED
CONTENTS
Machine description (see attached illustration)
1
Machine body
2
Swivel handle
3
Handle lock switch
4
Safety switch
5
Main power switch
6
Blade assembly for cutting grass
7
Blade assembly for cutting shrubs
8
Telescopic pole*
9
Lock switch for setting the height
of the telescopic pole*
0
Safety lock for fastening the telescopic pole
qa
Accessory wheels*
qs
Fastening bolt
qd
LED battery charge indicator
qf
Power supply slot
0
Opening for fastening the telescopic pole
* for model FZN 4002-AT
Supplied contents
Carefully take the machine out of the packaging and check whether all the following parts are present:
Cordless shear with a blade assembly for cutting grass in a protective cover
Blade assembly for cutting shrubs
Wheels*
Telescopic pole*
Battery charger
User's manual
* for model FZN 4002-AT
If there are parts missing or they are damaged, please contact the vendor from whom you bought the
machine.
4. ASSEMBLY OF THE MACHINE
1.
Product is fully assembled. Take off the protective plastic blade cover before use and store it so that
it can be reused when the product is not being used.
2.
The battery must be recharged before use. Follow the instructions for charging.
3.
If while cutting branches the blades jam, IMMEDIATELY release the trigger switch and release the
blocked tool. If you continue to hold the trigger switch while the blades are jammed you will cause
damage to the motor.
4. IMPORTANT: This is a power tool that is very easy and comfortable to use. Please pay special
attention to the position of the blades during work with this tool so that you avoid injury.