Flintec FT-16D V.1.02 - Manual (Page 20)

7.7 Ticket and Printer Settings
Please press [F7] the setup & records menu to access the ticket and printer settings menu.
Ticket and printer settings
In the following the sub-menu will be described:
Ticket type
The type of the ticket (standard weigh bill / customized weigh bill) can be
defined here. Selecting the customized option, the user can define the
format of the ticket
Ticket printer The connection type of the printer can be select here (parallel / serial).
Print entry headers? This item is only visible if the ticket type is set to customized.
“1”:
The entry headers and their contents will be printed on the ticket
“2”: Only the entry contents will be printed on the ticket
No. of copies This setting defines how many copies of the ticket will be printed
Line Feed at the Beginning
This setting defines the empty space at the top of the ticket
Line Feed at the End This setting defines the empty space at the end of the ticket
To alter a letter menu item (via a selection table, but not a numerical menu part) use the “Space” key.
To save the changes, press the “Enter” key several times until the menu closes.
7.7.1 Customized Ticket
To access the custom design, in the printer and printer settings menu, select the ticket type as customized
and press the “Enter” key repeatedly until the following question shows up:
Ticket and printer settings
Press “1“ key to define the ticket. The menu below will show up:
FT-16/FT-16D Weighbridge User Manual, Rev.1.02 June 2008 Page 20 of 24