Flintec FT-16D V.1.02 - Manual (Page 4)

1. M AIN M ENU
The FT 16/16D is powered up by the switch at the rear side of the terminal. After start-up the start screen will
be displayed.
Start screen and password entry
Please enter the password “1234” to pass to the main menu (to change the password see chapter 7.8).
Main menu
To enter the sub-menus, press the function keys shown at the left side of the window.
If the [F7] key is pressed, the screen will return to the start screen again. Thereby the password can be used
to protect the scale against unauthorized access.
# of 1st weighing:
This counter shows the actual number of vehicles
which run through the 1
st weighing only.
# of 2nd weighing: This counter shows the number of vehicles
which run through the complete weighing (1
st and 2 nd weighing).
FT-16/FT-16D Weighbridge User Manual, Rev.1.02 June 2008 Page 4 of 24