Flintec FT-16D V.1.02 - Manual (Page 5)

2. 1
ST
W EIGHING
To weigh a vehicle the first time access the 1 st weighing menu by pressing [F1] in the main menu.
1st weighing menu
Please enter the weighing data in the menu including the vehicle’s license tag. If any entry in the menu is
defined as “table entry” (see chapter 7.2), a table window including the previously entered data opens
automatically at the right part of the screen (shown below).
1
st
weighing menu
When typing in a few characters, the table list will show a contents which fits the entered letters. So it will be
easier to find the actual needed data. Press the “TAB” key to access the table. The list selection can be done
by “↓“, “↑“, “PgUp“ and “PgDn“ keys. Pressing the “Enter” key will accept it. If the target entry does not exist in
the table, it can be entered via keyboard.
At the end of menu, the message <[ENTER] get weight> appears. The vehicle weight will be recorded and
displayed as soon as the “ENTER“ key is pressed.
1
st weighing will be completed by pressing one of the following keys:
[F1] : 1st weight is saved and the ticket (weigh bill) is printed
[F2] : 1st weight is saved and the ticket (weigh bill) is not printed.
[F3] : 1st weight is not saved and the ticket (weigh bill) is printed
FT-16/FT-16D Weighbridge User Manual, Rev.1.02 June 2008 Page 5 of 24