After-flight maintenance, Reversing flight controls – Flyzone FLZA2100 User Manual
Page 7
Advertising
7
AFTER-FLIGHT MAINTENANCE
Remove the batteries from the transmitter when not in use.
REVERSING FLIGHT CONTROLS
Reversing the control direction of the rudder can be
accomplished by following the steps below.
Press
1. Press and hold the rudder right side digital trim button down
and turn the transmitter on.
2. Keep holding the digital trim button down for 3 seconds
until tones are heard, confi rming the selection.
3. Connect the battery and complete the fl ight control test,
confi rming that the rudder moves in the correct direction.
Advertising