Flyzone FLZA3634 User Manual
Page 5
5
❏
9. Assemble and glue the display stand together as shown using foam-safe glue. The long slots in the two large pieces interlock
and the four cross braces are glued into the small slots.
❏
10. Fit the wing tip tanks in place. They are held on magnetically.
It is safe to fly with the tanks in place. However, we recommend
a couple small dots of hot glue or silicone inside each one to
ensure they do not come off during high speed maneuvers.
❏
11. Test fit the battery into the radio compartment. When you
check the balance of the model later in this manual, you will
determine exactly where the battery needs to be placed in the
compartment. We suggest marking this location with a felt-tip
pen or a dot of paint for future reference.
You have now finished the assembly of your L-39! Place it on the display stand to admire it for a few minutes, then gather an
AccuThrow gauge or ruler and your C.G. machine to set the throws and balance point.