Flyzone FLZA3322 - Manual (Page 5)

5
ASSEMBLE THE MODEL
Install the Tail Section
❏
1. Slide the horizontal stabilizer between the tail pushrods
and the stabilizer pocket. You will need to slightly fl ex the
pushrods in order get the stabilizer in position.
❏
2. When fi tting the horizontal stabilizer into the pocket,
guide the tail wheel tiller arm through the plastic hoop on the
underside of the rudder.
❏
3. Use two 3 x 30 mm machine screws to secure the
stabilizer in place.
Setting Up the High Wing Confi guration
We recommend fl ying the Mini Switch fi rst in the high wing
confi guration. The high wing position will make the orientation
of the airplane more visible at high altitudes.
❏
1. Connect the clevises on the pushrods to the outer holes
in the elevator and rudder control horns. Squeeze the ends
of the clevises to ensure they are snapped together properly.