Flyzone FLZA4014 - Manual (Page 11)

11
❏
3. Turn the wing over. Making sure the aileron servo wire
doesn’t get caught between the bottom of the wing and the
top of the fuselage, key the tab in the wing into the notch
just ahead of the aft mounting post. Push the top of the wing
down and back to lock it in.
❏
4. Fasten the wing to the fuselage with a 3 x 10mm Phillips
screw.
❏
5. Turn the airplane over. Remove the 2 x 15mm screws
that are holding in the rear of the landing gear and mount the
ends of the struts with the screws.
❏
6. Fasten the struts and strut braces to the wing with
2 x 8mm Phillips screws.