Flyzone HCAA1993 User Manual
Before attempting to operate or fly your MICRO
ULTRIX Biplane, please make sure you fully
understand its operation outlined in this section.
Note: The following is a detailed description of
how you will control your MICRO ULTRIX
Biplane in flight. Please study it carefully so you
will become familiar with the operation of the
transmitter before you head for the flying site.
Your transmitter controls the height of the airplane
by operating both motors and the direction of the
plane by slowing down either the left or right motor.
1. First extend the transmitter antenna. Then
switch on the transmitter and make sure the green
light is on.
2. Make sure the airplane’s battery is charged.
3. Move the switch located on the left side of the
fuselage backward to the “ON” position.
CAUTION: Stay clear of the propellers once the
airplane’s switch is turned on.
4. Moving the left stick forward will cause both
motors to run at full power. At this setting, the plane
should climb at a 10-15° angle. NOTE: For most of
the flight, you will be pushing the stick forward.
5. Moving the right stick to the right will cause the
right motor to slow down. This will cause the plane
to turn to the right.
HOW DOES THE MICRO ULTRIX
BEFORE GOING TO THE FIELD