Model reset "m-res, Fu nction – Futaba 3PKS User Manual
Page 94
94
F
u
nction
(Opening Screen)
MENU 1
Press t
he
button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t
he
button
* When the direct call button is set,
the setup screen is also called by the
following method:
•Select the setting item by
button
* b l i n k s a t t h e c u r r e n t
setup item.
Model Reset "M-RES"
Current model #
Model Reset "M-RES"
Select the setting item "TYPE" by (JOG) button up or down
operation and press the (+) or (-) button and select the reset
type from among "DATA RESET", "MENU RESET", and "ALL
RESET".
1
(Reset execution)
Select the setting item "EXEC" by (JOG) button up or down
operation.
Press the (+) and (-) buttons simultaneously for 1 second.
When "COMPLETE!" blinks at the bottom of the screen,
memory resetting is complete.
2
When ending setting, return to the initial screen by pressing the (END)
button twice (for direct selection, press the (END) button once).
Model Reset
Type (TYPE)
DATA RESET
MENU RESET
ALL RESET
This function resets the contents of the currently called model memory.
The reset method can be selected from among the 3 types described below. These resets
do not initialize the adjuster function (ADJST), system function (SYSTM), lap reset
(LAP-L), user name (NAME), and modulation (HRS/PCM/PPM) selection function (P-
MOD).
DATA RESET
Initializes only the function setting data. The menu function and direct selection function are not initialized.
MENU RESET
Initializes the menu function and direct selection function. Other settings are not initialized.
ALL RESET
Initializes the menu function, direct selection function, and the setting data of each function.
Reset execution button
- (+) and (-) buttons pressed
simultaneously for about 1 sec-
ond.
Setup item selection
- Select by (JOG) button up or
down operation.
Reset type selection
- Use the (+) and (-) buttons to
make adjustments.