Futaba 3VCS - Manual (Page 77)

78
Functions
(Initial screen)
Use the or
button to select the
menu screen.
Press the button.
Use the or
button to select the
function.
Press the button.
Calling the setup screen
* When the direct call button is set,
the setup screen is also called by the
following method:
MENU SELECT
DIRECT SEL
Press the and
button simulataneously.
Press the button set
at this function.
* Calling from menu screen
(Initial screen)
MENU
Model Copy
1 (Copy destination selection)
Use the (DN) or (UP) button to select the model
No.
2 (Copy execution)
Press the (+) and (-) buttons simultaneously for
about 1 second. ("COMPLETE!" blinks)
3 When ending adjustment, return to the initial
screen by pressing the (END) button 3 times.
Model Copy/MDL-COPY
This function copies the entire contents of the currently called model memory to
another model memory.
*Current model No. and model name
*Copy destination model No.
and model name
Model Copy/MDL-COPY
Model No.
01~10: Model memory in
the Transmitter
11~20: Model memory in
the CAMPac-16K