Futaba 10C 2.4GHz User Manual

Page 45

Advertising
background image

45

TIMER

submenu (stopwatch functions): controls three electronic clocks used to keep track of time remaining in a

FRPSHWLWLRQWLPHDOORZHGÀ\LQJWLPHRQDWDQNRIIXHODPRXQWRIWLPHRQDEDWWHU\HWF

Adjustability:
• Count down timer: starts from the chosen time, displays time remaining. If the time is exceeded, it continues to count

below 0.

• Count up timer: starts at 0 and displays the elapsed time up to 99 minutes 59 seconds.
• Count down timer (Stop type): starts from the chosen time, displays time remaining, and stops at 0.
• Model timer: cumulates ON time up to 99 hours 59 minites each model. Once Model timer function is turned off, the

cumulate time will also be reset to "0:00".

• Independent to each model, and automatically updates with model change.
• In either TIMER mode, the timer beeps once each minute. During the last twenty seconds, there's a beep each two seconds.

'XULQJWKHODVWWHQVHFRQGVWKHUH VDEHHSHDFKVHFRQG$ORQJWRQHLVHPLWWHGZKHQWKHWLPHVHOHFWHGLVUHDFKHG 83
DOWN TIMER)

• To Reset, choose the desired timer with the CURSOR lever (while at the startup screen), then press and hold DIAL for 1

second.

• Activation by either direction of SWITCH A-H, by THROTTLE STICK (STK-THR) (Using the THROTTLE STICK is

convenient if you are keeping track of fuel remaining, or for an electric, how much battery is left), by LOGIC SWITCH
Lsw1-Lsw3
or by the power SWITCH (PWR SW). Set up LOGIC SW: See p. 38.

• Also the reset switch can be assigned (SWITCH A-H or LOGIC SWITCH Lsw1-Lsw3)

GOAL of EXAMPLE:

STEPS:

INPUTS:

6HWWLPHUWRFRXQWGRZQPLQXWHV
b e i n g c o n t r o l l e d b y T H R O T T L E
STICK
position. This is utilized to keep
track of actual Throttle on time to better
FRUUHODWHZLWKIXHOEDWWHU\XVDJH

Open BASIC menu, then open TIMER
function.

for 1 second.

(If ADVANCE,

again.)

to page 2.

C

to TIMER.

Go to TIMER<2>.

C

to 10 (TIMER<2>).

Adjust time to 4 min. 30 sec., count
down.

to 4.

C

to 00 (TIMER<2>).

to 30.

Assign to THROTTLE STICK and set
trigger point.

C

to ON>SwA (TIMER<2>).

to STK THR.

C

to 50%.

for 1 second to NULL.

THROTTLE STICK to desired

SRVLWLRQ ([VWLFN 

for 1 second to set.

Close.

Where next?

Adjust END POINTs

DIWHU¿UVWÀLJKWWHVWVHHS

$GMXVWDX[LOLDU\FKDQQHODVVLJQPHQWV H[PRYHÀDSVWRDVZLWFK VHHS
Set up TRAINER functions: see p. 47.

TIMER<1>

TIMER<2>

TIMER<3>

(Home screen)

Advertising