Power connection, Rf modulator, Placement – Philips CDI550 User Manual
Page 9: Installation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION
POWER SUPPLY
POWER CONNECTION
13 DC output
14 Mains AC input.
RF MODULATOR
15 ANT IN.
16 ANT OUT.
17 Channul Selector.
18 Audio/Power Cable.
19 Video Cable.
PLACEMENT
Place the player on a firm, flat surface.
Keep away from heat sources and direct sunlight.
In a cabinet, allow 2-3 cm (appr. I") of free space around the
circumference of the player for adequate ventilation.
• Connect the DC output (13) of the power supply into the DC IN
(6) of the player.
• Insert the plug of the cord (14) into an AC outlet.
NOTE
- The power supply automatically adjusts to the local power
voltage.
- This power supply is intended to be used only with this CD-I
player.
Only use the prescribed Power Supply:
• For USA use type 20PS301/17
CAUnON
- ONLY A QUALIFIED SERVICE PERSON SHOULD REMOVE
THE COVER OTHER THAN THE DIGITAL VIDEO
CARTRIDGE COVER OR ATTEMPT TO SERVICE THIS
DEVICE.
- USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
- NEVER MAKE OR CHANGE CONNECTIONS WITH THE
POWER SWITCHED ON.