Philips IS-F7000 User Manual
Is_f7000, Philips, Lightoliièr
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
LIGHTOLIIÈR*
Lighting Systems
IS_F7000
Page 1 of 6
Instruction Sheet for Assembly and Installation of Pendant F7000
READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE PROCEEDING.
RETAIN THESE INSTRUCTIONS FOR MAINTENANCE REFERENCE.
This fixture is intended for installation in accordance with the National Electrical Code and local regulations.
To assure full compliance with local codes and regulations, check with your local electrical inspector before
installation. To prevent electrical shock, turn off electricity at electrical panel before proceeding.
DO NOT INSTALL THIS SYSTEM IN A WET OR DAMP LOCATION.
DO NOT ENERGIZE ANYTHING OTHER THAN THE FIXTURES IN THE SYSTEM.
DO NOT OVERLOAD FEED CABLE, 10AMP MAX FOR SJT 18-3 AND 7 AMP MAX FOR SJT 18-4 & 18-5.
THE FIXTURES IN THIS SYSTEM HAVE A POLARIZED MALE AND FEMALE PLUG AT EACH END, THESE PLUGS WILL
SNAP TOGETHER SIMPLY BY PUSHING FIXTURES TOGETHER.
CONTRACTOR IS RESPONSIBLE FOR ADEOUATELY REINFORCING CEILING TO SUPPORT FIXTURE WEIGHT.
M fcj
m
F7300
F7500
F7600
F7700
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
Lightolier is a Philips group brand
PHILIPS