System setup, Receiver adjustment – Philips FR999 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SYSTEM SETUP
Receiver adjustment
Once the number and position of the speakers has been fixed,
you can adjust the initial receiver settings for optimum
surround sound with the actual setup;
(0
1
Set which speakers have been connected to the receiver
(see "Menus/BPEIRKf? REIUP").
Note: The initial setting of your receiver is:
two front speakers left and right: present
(cannot be altered)
center speaker: present
two rear speakers: present
subwoofer: present
2
Select the size of the speakers (5MRLL orLRPGP)
(see "Menus/5PERKR SIZES").
Select SriRLL if your speaker is able to reproduce low
notes down to at least 80-100 Hz,
Select LRPGE if your speaker is able to reproduce low
notes down to at least 50 Hz.
(As a rule of thumb, a LRPGE speaker has a cone diameter
of at least 12 cms (5 inches).)
See the specification sheets of your speakers.
Note: The Initial setting of your receiver is:
all speakers: LRRGZ
3
Set the distance from the speakers to the listener's position
(see "Menus/5PK ilGIRWEE").
Note: The initial setting of your receiver is:
all speakers: 10 feet (3 meters)
15