Remote control use, Remote control – Philips FR999 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REMOTE CONTROL
Remote control use
Open the battery compartment
of the remote control and insert
2 alkaline batteries, type AA
(R06, UM-3).
Remove batteries if they are
dead or if the remote control
will not be used for a long time.
Batteries contain chemical substances, so they should
be disposed of properly.
The buttons on the remote control work the same way as the
corresponding ones on the receiver.
Important!
You have to press a source button for longer than 1 second to
switch the sound source on the receiver. Pressing a source
button for less than 1 second will only switch the remote
control to use the commands for the selected product
The remote control remains tuned to the selected source until
another source button on the remote control is pressed. This
enables you to operate additional sources ¡1. e. winding a
tape) without changing the source on the receiver.
<A